![](/images/backgrounds/285809/hp-6400cl-users-manual-54995016x1.png)
Introducing the Switch
Introducing the Switch
Front of the Switch
Expansion cl Module LEDs
Expansion cl Module LEDs refer to the LEDs specific to the expansion module. These LEDs are located on the physical expansion module bulkhead. These LEDs are only viewable in the rear of the Switch on the Expansion Module itself.
TableName | Color | Mode | Description |
|
|
|
|
Expansion Module LEDs per module |
| ||
|
|
|
|
Module | Green | On | Expansion cl module is plugged into expansion slot and operating |
Power |
|
| correctly |
(ports A & B) |
| Off | Expansion cl module's power has been turned OFF, and the card can be |
|
|
| |
|
|
| removed from the box if necessary. |
Module | Orange | On | Expansion cl module is plugged into expansion slot but has experienced |
Fault |
|
| |
(ports A & B) |
|
| a fault |
|
|
|
|
Expansion Module LEDs per port |
| ||
|
|
|
|
Link | Green | On | Indicates the port LEDs are displaying link information: |
|
|
| • if the port LED is on, the port is enabled and receiving a link indication |
|
|
| from the connected device. |
|
| Off | • if the port LED is off, the port has no active network cable connected, |
|
|
| or is not receiving link beat or sufficient light. Otherwise, the port may |
|
|
| have been disabled through the switch console, the web browser |
|
| Blinking | interface, or ProCurve Manager. |
|
| • if the port LED is blinking* simultaneously with the Fault LED, the | |
|
|
| corresponding port has failed its self test. |
|
|
|
|
Activity | Green | On | Indicates the port LEDs are displaying network activity information. |
|
|
|
|
C a u t i o n | It is recommended the power to the switch be removed before inserting or |
| extracting the expansion module. If the expansion module is inserted or |
| removed with the switch powered on, a reset will occur. Only install or remove |
| these modules during scheduled downtime. |
|
|