| Installing the Switch |
| Installation Procedures |
| 2. (Optional) Install or Remove a cl Module |
|
|
C a u t i o n | It is recommended the power to the switch be removed before inserting or |
| extracting the expansion module. If the expansion module is inserted or |
| removed with the switch powered on, a reset will occur. Only install or remove |
| these modules during scheduled downtime. |
| 1. Remove the cover plate |
| |
| Align the edges of the board with guides |
Switch the Installing
Extractor Handles
2.Insert the module aligning with the guides in the slot.
3.Once the contacts have engaged, use the extractor handles to seat the module completely.
4.Tighten the captive screws.
Refer to the ProCurve Switch cl Modules Installation Guide for more details.
If you have installed a media flex module, you can now install a transceiver.
See the following step.