Introducing the Switch

Back of the Switch

Back of the Switch

The back of both 6400cl Series switches look the same.

Cooling vents - make sure this is not

ProCurve Series 6400cl Switch

obstructed for proper switch operation

 

 

 

Optional cl module slot

 

RPS Input Port

 

AC power connector

 

 

 

 

 

cl Module Slot

This switch supports one of two types of cl modules:■10-GbE Copper cl Module (J8434A) - provides two CX4 fixed copper ports

■10-GbE Media-Flex cl Module (J8435A) - provides two flexible media slots that support a number of different transceivers. See the ProCurve Switch cl Modules Installation Guide for more information on supported transceivers.

RPS Input Port

The Series 6400cl Switch supports connectivity to a redundant power supply. The “ProCurve 600 Redundant and External Power Supply (RPS/EPS) (J8168A) is an accessory product for the Series 6400cl Switch devices. The RPS/EPS provides redundant power to any one of up to six switch products, to back up the power supply in the switch in case of loss of AC power. See Step 8 of the installation instructions page 2-15for more information.

Power Connector

The Series 6400cl Switch devices do not have a power switch; they are powered on when connected to an active AC power source. These switches automatically adjust to any voltage between 100--240 volts and either 50 or 60 Hz. There are no voltage range settings required.

Switch the Introducing

1-9