To clear a paper jam in the automatic document feeder

Chapter 8

To clear a paper jam in the automatic document feeder

1.Lift the cover of the automatic document feeder.

2.Lift the tab located on the front edge of the ADF.

3.Gently pull the paper out of the rollers.

Avoid paper jams CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and wheels for torn pieces of paper that might remain inside the printer. If you do not remove all the pieces of paper from the printer, more paper jams are likely to occur.

4.Close the cover of the automatic document feeder, pressing down firmly until it snaps into place.

Avoid paper jams

To help avoid paper jams, follow these guidelines.

Remove printed papers from the output tray frequently.

Make sure that you are printing with media that is not wrinkled, folded, or damaged.

Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag.

Do not use paper that is too thick or too thin for the printer.

Make sure that the trays are loaded correctly and are not too full. For more information, see Load media.

Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.

Do not place too much paper in the document feeder tray. For information on the maximum number of sheets allowed in the automatic document feeder, see Media specifications.

Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the input tray must be the same size and type.

Adjust the paper-width guides in the input tray to fit snugly against all paper. Make sure the paper-width guides do not bend the paper in the input tray.

Do not force paper too far forward in the input tray.

128 Solve a problem

Page 132
Image 132
HP 6600 - H7 manual Avoid paper jams, To clear a paper jam in the automatic document feeder