HP 6600 - H7 manual or Printing Preferences, Mac OS

Chapter 8

Mac OS X

1.Click System Preferences in the Dock, and then click Print & Fax or Print & Scan.

2.Select the printer, and the click Open Print Queue.

3.If the print job is on hold, click Resume.

4.If the printer is paused, click Resume Printer.

If you can use the printer after performing the steps above but find that the symptoms persist as you continue to use the printer, your firewall might be interfering. For more information, see Configure your firewall software to work with the printer

If you still cannot use the printer over the network, continue to the next section for additional troubleshooting help

Step 5: Make sure the wireless version of the printer is set as the default printer driver (Windows only)

If you install the HP software again, the installer might create a second version of the printer driver in your Printers or Printers and Faxes or Devices and Printers folder. If you have difficulties printing or connecting to the printer, make sure the correct version of the printer driver is set as the default.

1.Click Start, and then click Printers or Printers and Faxes or Devices and Printers.

- Or -

Click Start, click Control Panel, and then double-click Printers.

2.Determine if the version of the printer driver in the Printers or Printers and Faxes or Devices and Printers folder is connected wirelessly:

a.	Right-click the printer icon, and then click Properties, Document Defaults,
	or Printing Preferences.
b.	On the Ports tab, look for a port in the list with a checkmark. The version of
	the printer driver that is connected wirelessly has HP network re-discovery
	port monitor as the Port description, next to the checkmark.

3.Right-click the printer icon for the version of the printer driver that is connected wirelessly, and select Set as Default Printer.

NOTE: If there is more than one icon in the folder for the printer, right-click the printer icon for the version of the printer driver that is connected wirelessly, and select Set as Default Printer.

Step 6: Make sure your computer is not connected to your network over a Virtual Private Network (VPN)

A Virtual Private Network (VPN) is a computer network that uses the Internet to provide a remote, secure connection to an organization’s network. However, most VPN services do not allow you to access local devices (like your printer) on your local network while your computer is connected to the VPN.

To connect to the printer, disconnect from the VPN.

118 Solve a problem