HP 6600 - H7 manual Solve printer management problems, Embedded web server cannot be opened

Models: 6600 - H7

1 216
Download 216 pages 59.54 Kb
Page 124
Image 124
Solve printer management problems

Chapter 8

If your firewall has a setting called "trusted zone," use this setting when your computer is connected to your network.

If your firewall has a setting to "not show alert messages," you should disable this. When installing the HP software and using the HP printer you may see alert messages from your firewall software that provide options to "allow," "permit" or "unblock." You should allow any HP software that causes an alert. Also, if the alert has a "remember this action" or "create a rule for this" selection, select it. This is how the firewall learns what can be trusted on your network.

Do not have more than one firewall enabled at the same time on your computer. An example would be having both the Windows firewall provided by the operating system and a third party firewall enabled at the same time. Having more than one firewall enabled at the same time will not make you computer any safer and may cause problems.

For more information about using your printer with personal firewall software, visit www.hp.com/go/wirelessprinting, and then click Firewall Help in the Need Help Troubleshooting? section.

Embedded web server cannot be opened NOTE: At this time, some portions of this site are not available in all languages.

Solve printer management problems

This section provides solutions to common problems that involve managing the printer. This section contains the following topic:

Embedded web server cannot be opened

Check your network setup NOTE: To use the embedded web server, the printer must be connected to

a network using a wireless connection. You cannot use the embedded web server if the printer is connected to a computer with a USB cable.

TIP: You can visit the HP online support website at www.hp.com/go/customercare for information and utilities that can help you correct many common printer problems.

Embedded web server cannot be opened

Check your network setup

Make sure you are not using a phone cord or a crossover cable to connect the printer to the network.

Make sure the network cable is securely connected to the printer.

Make sure the network hub, switch, or router is turned on and working correctly.

Check the computer

Make sure the computer that you are using is connected to the network.

Check the computer NOTE: To use the EWS, the printer must be connected to a network. You cannot use the embedded web server if the printer is connected to a computer with a USB cable.

120 Solve a problem

Page 124
Image 124
HP 6600 - H7 manual Solve printer management problems, Embedded web server cannot be opened, Check your network setup