HP 7750 manual Choose Start Run

Chapter 5 Operating the Cisco ICS 7750

Backing Up System Data

d.Copy and paste the output from the show startup-config command into a text file where you stored your backup files:

–Choose Start > Run.

–Enter the following command to open Notepad:

notepad.exe

–Select and copy the startup-config output from the Telnet console, and paste it into the Notepad window.

Note Do not include the – More – lines if they are displayed in the output. Select the contents from the Telnet console, and copy them to the clipboard. Go to the Notepad window, and paste the clipboard contents.

If – More– is displayed at the bottom of the Telnet console, press the space bar to display the next screen. Copy from the Telnet console again, and paste to the Notepad window. Repeat until the entire startup configuration has been displayed, copied, and pasted.

–From Notepad, choose File > Save.

–Save the startup-config file under the Shared Pathname you entered in Step 3d in the “Using Backup Now” section on page 5-27(for example, \\hostname\sharename\path). Name the config file in this format: <backupname>_<hostname>, where backupname comes from the Backup Name in Step 3a in the “Using Backup Now” section on

	Cisco ICS 7750 Installation and Configuration Guide
78-14165-03		5-29