Chapter 5 Operating the Cisco ICS 7750
Accessing the System
Step 4 Press
A. System Alarm Processor
B. MASTER System Processing Engine
C. System Switch Processor
1.Slot 1: Multiservice Route Processor
2.Slot 2: Multiservice Route Processor
3.Slot 3: Multiservice Route Processor
4.Slot 4: Multiservice Route Processor
5.Slot 5: System Processing Engine
6.Slot 6: System Processing Engine
Make a selection to switch:
Step 5 Enter the number or letter that corresponds to the card or slot to which you want to connect.
You are now connected to the selected card, and you can enter the CLI commands that are supported on that card.
Best Practices for Using Microsoft SQL Server
ICS System Manager and Cisco CallManager require Microsoft SQL Server.
Caution Because of a known issue with Microsoft SQL Server, if you do not install Cisco CallManager on the SPE310 running System Manager, you could expose your network to distributed denial of service (DDoS) attacks. If you do not intend to install Cisco CallManager on the SPE310 running System Manager, you can prevent DDoS attacks by completing the workaround that is provided in the Release Notes for the Cisco ICS 7750 for System Software Release 2.x.x.
Caution Microsoft SQL Server is installed on the SPE310 running System Manager at the factory. If you are reimaging an SPE310 running System Manager, the Image Install Tool installs Microsoft SQL Server. For other SPE310s on which you intend to install Cisco CallManager, Microsoft SQL Server is installed during the Cisco CallManager installation process.
| Cisco ICS 7750 Installation and Configuration Guide |
