Siemens 420 manual Changing parameters using the operator panel, Step Result on the display

Issue 07/04 3 Functions

3.2.4Changing parameters using the operator panel

The way that parameter P0719 can be changed will now be described; please use this description as a basis when setting all of the other parameters using the BOP.

Changing P0004 – parameter filter function

Step

Result on the display

1Press in order to access the parameter

2 Press until P0004 is displayed

3Press in order to reach the parameter value level

4 Press or in order to obtain the required value

5 Press to acknowledge the value and to save the value

6The user can only see the command parameters.

Changing an indexed parameter P0719 – selecting the command/frequency setpoint

Step

Result on the display

1 Press in order to access the parameter

2Press until P0719 is displayed

3 Press in order to reach the parameter value

4Press in order to display the currently set value

5Press or in order to obtain the required value

6Press to acknowledge the value and to save the value

7Press until r0000 is displayed

8Press in order to return to the operating display (the display which the customer has defined)

Fig. 3-10 Changing parameters using the BOP

NOTE

The BOP sometimes display when changing parameter values. This means that the drive inverter is presently handling another higher-priority task.

MICROMASTER 420	Operating Instructions
6SE6400-5AA00-0BP0	55