Siemens 420 manual P1070 =, P0840 =, P2051 =, P0731 =

Issue 07/04 3 Functions

In order to interconnect two signals, a BICO setting parameter (signal receiver) must be assigned the required BICO monitoring parameter (signal source). A typical BICO interconnection is shown using the following examples (refer to Fig. 3-6).

Connector output (CO)			===>	Connector input (CI)
				CI: Main setpoint
	Function	CO: Act. ADC after scal. [4000h]			P1070
		r0755			(755)
				P1070 = 755
Binector output (BO)			===>	Binector input (BI)
		BO: Status word of ADC			BI: ON/OFF1
	Function				P0840
		r0751			(751:0)
				P0840 = 751.0

Function

Function

Connector output / Binector output (CO/BO)			CI: PZD to CB
	P2051 = 52		P2051
			(52)
	CO/BO: Act. status word 1
Function	r0052
	r0052
		BI: Function of digital output 1
			P0731
			(52:3)

P0731 = 52.3

Function

Function

Fig. 3-6 BICO connections (examples)

NOTE

BICO parameters with the CO, BO or CO/BO attributes can be used a multiple number of times.

MICROMASTER 420	Operating Instructions
6SE6400-5AA00-0BP0	49