Siemens 420 manual Digital output Dout, 5.5, Selection of frequency setpoint

3 Functions Issue 07/04

3.5.5.4Digital output (DOUT)

P0731 =...

P0748 = 0

BI: Function of digital output 1*	52.3
Defines source of digital output 1.
Invert digital output	0

Defines high and low states of relay for a given function.

Common Settings:
52.0	Drive ready	0	Closed
52.1	Drive ready to run	0	Closed
52.2	Drive running	0	Closed
52.3	Drive fault active	0	Closed
52.4	OFF2 active	1	Closed
52.5	OFF3 active	1	Closed
52.6	Switch on inhibit active	0	Closed
52.7	Drive warning active	0	Closed

DOUT channel Invert DOUTs

0 ... 1

P0748 (0)

BI: Fct. of DOUT 1
P0731	0
(52:3)	1	-1

CO/BO: State DOUTs

r0747

r0747.0

COM Kl.10

NO

Kl.11

3.5.5.5

P1000 =...

Selection of frequency setpoint

Selection of frequency setpoint				2
0	No main setpoint
1	MOP setpoint
2	Analog setpoint
3	Fixed frequency
4	USS on BOP link
5	USS on COM link
6	CB on COM link
	MOP		Sequence control
	ADC
	FF	P1000 = 12	Additonal
			setpoint
	USS		Setpoint	Motor
	BOP link		channel	control
	USS	P1000 = 12	Main
	COM link		setpoint
	CB
	COM link

MICROMASTER 420	Operating Instructions
74	6SE6400-5AA00-0BP0