Siemens 420 manual P03053, Rated motor current

3 Functions Issue 07/04

Attribute	Attribute			Description
group
Active		This attribute is only of importance in conjunction with a BOP. The "Immediate"
		attribute indicates that this value is already accepted when scrolling (when changing
		the value with	or	). Especially parameters which are used for optimization
		functions have this property (e.g. constant voltage boost P1310 or filter time
		constants). On the other hand, for parameters with the attribute "After actuation", the
		value is only accepted after first actuating the key			. These include, for example,
		parameters where the parameter value can have different settings/meanings (e.g.
		selecting the frequency setpoint source P1000).
	Immediately	The value becomes valid by either scrolling with			or
	After	The value is only accepted by pressing
	actuation

The attributes and groups are shown, in the parameter list, in the header line of the parameter. This is shown as an example in Fig. 3-2 using parameter P0305.

Parameter number
	Index BICO (if exist)
		Parameter text						Access level
P0305[3]	Rated motor current						Min:	0.01	Level:
	CStat:	C	Datatype:	Float	Unit	A	Def:	3.25	1
	P-Group:	MOTOR	Active: first confirm		QuickComm. Yes		Max:	10000.00
	Group		Active		QuickComm.		Wertebereich
	CStat		Datatype		Unit

Fig. 3-2 Header line for parameter P0305

MICROMASTER 420	Operating Instructions
42	6SE6400-5AA00-0BP0