Siemens 420 manual Input voltage range AC 200 V 240 V, ± 10 % Unfiltered, Kva, Awg

Issue 07/04 5 MICROMASTER 420 specifications

Input voltage range			1 AC 200 V – 240 V, ± 10 %
(Unfiltered)
Order No.	6SE6420-		2UC11	2UC12	2UC13	2UC15	2UC17	2UC21	2UC21	2UC22	2UC23
			-2AA1	-5AA1	-7AA1	-5AA1	-5AA1	-1BA1	-5BA1	-2BA1	-0CA1
Output Rating		[kW]	0.12	0.25	0.37	0.55	0.75	1.1	1.5	2.2	3.0
		[hp]	0.16	0.33	0.5	0.75	1.0	1.5	2.0	3.0	4.0
Output Power		[kVA]	0.4	0.7	1.0	1.3	1.7	2.4	3.2	4.6	6.0
Input Current 1)		[A]	1.8	3.2	4.6	6.2	8.2	11.0	14.4	20.2	35.5
Output Current		[A]	0.9	1.7	2.3	3.0	3.9	5.5	7.4	10.4	13.6
Fuse		[A]	10	10	10	10	16	20	20	32	40
Recommended
		3NA	3803	3803	3803	3803	3805	3807	3807	3812	3817
For UL specified
			*	*	*	*	*	*	*	*	*
Input Cable, min.		[mm2]	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	2.5
		[awg]	17	17	17	17	17	17	17	17	13
Input Cable, max.		[mm2]	2.5	2.5	2.5	2.5	2.5	6.0	6.0	6.0	10.0
		[awg]	13	13	13	13	13	9	9	9	7
Output Cable, min.		[mm2]	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.5
		[awg]	17	17	17	17	17	17	17	17	15
Output Cable, max.		[mm2]	2.5	2.5	2.5	2.5	2.5	6.0	6.0	6.0	10.0
		[awg]	13	13	13	13	13	9	9	9	7
Weight		[kg]	1.2	1.2	1.2	1.2	1.2	2.9	2.9	3.1	5.2
		[lbs]	2.6	2.6	2.6	2.6	2.6	6.4	6.4	6.8	11.4

Input voltage range			3 AC 200 V – 240 V, ± 10 %
(with built in Class A Filter)
Order No.	6SE6420-		2AC23	2AC24	2AC25
			-0CA1	-0CA1	-5CA1
Output Rating		[kW]	3.0	4.0	5.5
		[hp]	4.0	5.0	7.5
Output Power		[kVA]	6.0	7.7	9.6
Input Current 1)		[A]	15.6	19.7	26.3
Output Current		[A]	13.6	17.5	22.0
Fuse		[A]	25	32	35
Recommended		3NA	3810	3812	3814
For UL specified			*	*	*
Input Cable, min.		[mm2]	2.5	2.5	4.0
		[awg]	13	13	11
Input Cable, max.		[mm2]	10.0	10.0	10.0
		[awg]	7	7	7
Output Cable, min.		[mm2]	1.5	2.5	4.0
		[awg]	15	13	11
Output Cable, max.		[mm2]	10.0	10.0	10.0
		[awg]	7	7	7
Weight		[kg]	5.2	5.5	5.5
		[lbs]	11.4	12.1	12.1

1)Secondary conditions: Input current at the rated operating point - applies for the short-circuit voltage of the line supply Vk = 1 % referred to the rated drive converter power and a rated line supply voltage of 240 V without line commutating reactor. If a line commutating reactor is used, the specified values are reduced by between 55 % and 70 %.

*UL listed fuses such as Class NON from Bussmann are required for use in America

MICROMASTER 420	Operating Instructions
6SE6400-5AA00-0BP0	161