Siemens 420 manual 2AB11 2AB12 2AB13 2AB15 2AB17 2AB21 2AB22 2AB23, 1BA1 5BA1, Lbs

5 MICROMASTER 420 specifications Issue 07/04

Table 5-4 MICROMASTER 420 Specifications

In order to have a UL compliant installation fuses from the SITOR range with the appropriate current rating must be used.

Input voltage range			1 AC 200 V – 240 V, ± 10 %
(with built in Class A Filter)
Order No.	6SE6420-		2AB11	2AB12	2AB13	2AB15	2AB17	2AB21	2AB21	2AB22	2AB23
			-2AA1	-5AA1	-7AA1	-5AA1	-5AA1	-1BA1	-5BA1	-2BA1	-0CA1
Output Rating		[kW]	0.12	0.25	0.37	0.55	0.75	1.1	1.5	2.2	3.0
		[hp]	0.16	0.33	0.5	0.75	1.0	1.5	2.0	3.0	4.0
Output Power		[kVA]	0.4	0.7	1.0	1.3	1.7	2.4	3.2	4.6	6.0
Input Current 1)		[A]	1.8	3.2	4.6	6.2	8.2	11.0	14.4	20.2	35.5
Output Current		[A]	0.9	1.7	2.3	3.0	3.9	5.5	7.4	10.4	13.6
Fuse		[A]	10	10	10	10	16	20	20	32	40
Recommended		3NA	3803	3803	3803	3803	3805	3807	3807	3812	3817
For UL specified
			*	*	*	*	*	*	*	*	*
Input Cable, min.		[mm2]	1.0	1.0	1.0	1.0	1.0	2.5	2.5	4.0	6.0
		[awg]	17	17	17	17	17	15	15	11	9
Input Cable, max.		[mm2]	2.5	2.5	2.5	2.5	2.5	6.0	6.0	6.0	10.0
		[awg]	13	13	13	13	13	9	9	9	7
Output Cable, min.		[mm2]	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.5
		[awg]	17	17	17	17	17	17	17	17	15
Output Cable, max.		[mm2]	2.5	2.5	2.5	2.5	2.5	6.0	6.0	6.0	10.0
		[awg]	13	13	13	13	13	9	9	9	7
Weight		[kg]	1.2	1.2	1.2	1.3	1.3	3.3	3.6	3.6	5.2
		[lbs]	2.6	2.6	2.6	2.9	2.9	7.3	7.9	7.9	11.4

1)Secondary conditions: Input current at the rated operating point - applies for the short-circuit voltage of the line supply Vk = 1 % referred to the rated drive converter power and a rated line supply voltage of 240 V without line commutating reactor. If a line commutating reactor is used, the specified values are reduced by between 55 % and 70 %.

*UL listed fuses such as Class NON from Bussmann are required for use in America

MICROMASTER 420	Operating Instructions
160	6SE6400-5AA00-0BP0