Siemens 420 manual 5.10 JOG, Ramp-function generator HLG

Issue 07/04 3 Functions

P1016 =...

P1017 =...

P1018 =...

Fixed frequency code –	1	1	Direct selection
Bit 0		2	Direct selection + ON command
Defines the selection method for fixed		3	Binary coded selection + ON command
frequencies.		NOTE
Fixed frequency code –	1	For settings 2 and 3, all parameters P1016 to
Bit 1		P1019 must be set to the selected value so that
		the drive inverter accepts the ON command.
Fixed frequency code –	1
Bit 2

3.5.5.10JOG

P1058 =...

P1059 =...

P1060 =...

P1061 =...

JOG frequency right 5.00 Hz

Frequency in Hz when the motor is being jogged in the clockwise direction of rotation.

JOG frequency left 5.00 Hz

Frequency in Hz when the motor is being jogged in the counter-clockwise direction of rotation.

JOG ramp-up time 10.00 s

Ramp-up time in s from 0 to the maximum frequency (P1082). The JOG ramp-up is limited by P1058 or P1059.

JOG ramp-down time 10.00 s

Ramp-down time in s from the maximum frequency (P1082) to 0.

JOG
f
P1082
(fmax)
P1058
	t
P1060	P1061

3.5.5.11Ramp-function generator (HLG)

P1091 =...

P1091 =...

P1091 =...

P1091 =...

P1101 =...

P1120 =...

P1121 =...

Skip frequency 1 (entered in Hz)	0.00 Hz	fout
Defines skip frequency 1 which avoids
effects of mechanical resonance and
suppresses frequencies within +/- P1101
(skip frequency bandwidth).

Skip frequency 2	0.00 Hz
Skip frequency 3	0.00 Hz		P1101
			Skip frequency
Skip frequency 4	0.00 Hz		bandwidth
		P1091	fin
Skip frequency bandwidth	2.00 Hz	Skip frequency
(entered in Hz)
Ramp-up time	10.00 s	f
(enters the accelerating time in s)		P1082
		(fmax)
Ramp-down time	10.00 s	f1
(enters the deceleration time in s)
			t
		P1120	P1121

MICROMASTER 420	Operating Instructions
6SE6400-5AA00-0BP0	77