HP 800 G1 manual Description Spare part number Converter board 732493-001

Converter board

Description	Spare part number
Converter board	732493-001

The converter board is located on the left side of the computer (viewed from behind) under the main rear cover. It is secured with two Torx screws and has two connectors.

Use the same converter spare part for all display panels; however, you must change jumper settings on the board based on the display panel.

To remove the converter board:

1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 34).

2.Remove the stand (see Stand on page 36).

3.Remove the access panel (see Access panel on page 40).

4.Remove the lower access panel (see Lower rear panel on page 73).

5.Disconnect the two cables from the board (1).

NOTE: Be careful not to damage the cables when disconnecting them from the board. Do not pull on the wires.

Converter board 79