HP 800 G1 manual To remove the system board

To remove the system board:

1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 34).

2.Remove the stand (see Stand on page 36).

3.Remove the access panel (see Access panel on page 40).

4.Remove the lower rear panel (see Lower rear panel on page 73).

5.Remove the VESA mounting plate (see VESA mounting plate on page 83).

6.Remove the memory modules (see Memory on page 51).

7.Remove the graphics heat sink (see Graphics heat sink on page 62).

8.Remove the processor heat sink (see Processor heat sink on page 63).

9.Remove the processor (see Processor on page 65).

10.Remove the graphics board (see Graphics board on page 66).

11.Remove the WLAN module (see WLAN module on page 56).

12.Disconnect all cables from the system board, noting their location for reinstallation.

88 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis