HP 810C Installing the HP DeskJet Control Panel for DOS, Before you install the DOS control panel

EPrinting from DOS Applications

Installing and Using the HP DeskJet Control Panel for

DOS

The HP DeskJet Control Panel for DOS software program is provided on the printer software disks and on the printer software CD. Go to ÒPrinter SoftwareÓ on page 70 for information on obtaining printer software on diskettes.

Installing the HP DeskJet Control Panel for DOS

To access the printerÕs features, install the HP DeskJet Control Panel for DOS as described below.

Before you install the DOS control panel:

1Perform all physical setup procedures given in Chapter 1 of this UserÕs Guide.

2Make sure that both the computer and the printer are turned on. If necessary, press the Power button to turn on the printer.

To install the DOS control panel from the CD:

		Czech	csy
1	Insert the printer software CD in your	Danish	dan
	computerÕs CD-ROM drive.	Dutch	nld
2		English	enu
	At the DOS prompt (C:\>), type cd, then	Finnish	fin
	your computerÕs CD-ROM disk drive	French	fra
	designator (for example D:\), then type the	German	deu
	three-letter designator for your lnaguage	Hungarian	hun
	(see the list at the right) followed by a	Italian	ita
	backslash (for example enu\ for English),	Korean	kor
		Norwegian	non
	then type DJCP\ then press Enter. for
		Polish	plk
	example:
		Portuguese	ptb
	C:\> cd D:\ENU\DJCP	Russian	rus
		Simplified Chinese	chs
3	At the DOS prompt (such as	Spanish	esm
	D:\ENU\DJCP>), type INSTALL and press	Swedish	svc
	Enter.	Thai	tha
		Traditional Chinese	cht

4Follow the instructions on the screen.

To install the DOS control panel from the floppy disks:

1Insert the last Installation Disk of the floppy set into your computerÕs floppy disk drive.

94