HP 830C, 810C manual What if the banner paper jams in the printer?

3Creative Printing

After you are done printing:

1Click Cut-Sheetin the Setup tab of the HP print settings box.

2Change the paper type to the type of paper you will be printing on next.

3Flip the banner switch down.

4Put paper into the IN tray.

What if the banner has a big gap or a crease where you donÕt expect it?

¥The printer might be picking up more than one sheet of paper at a time. Take the paper out, then fan the stack. Also be sure the top and bottom margins are set to zero in your banner program. Print the banner again.

¥The software program from which you printed may need to be set to print on a continuous sheet instead of individual pages. See the manual provided with your software program.

What if the banner paper jams in the printer?

¥You might not have clicked Banner on the Setup tab in the HP print settings box.

¥Put in more than five, but fewer than 20, sheets of paper.

¥Make sure the banner switch (located on the printer) is up.

¥See the online HP DeskJet 8xxC Series Printer Release Notes for the appropriate settings for specific software programs.

¥Make sure you remove all paper before loading the banner paper.

¥See ÒClearing a Paper JamÓ on page 69 for instructions on how to remove jammed paper from your printer.

What if you get a message that says youÕre out of paper, but youÕre not?

You might not have pushed the paper-length adjuster or the IN tray in all the way. Make sure itÕs snug against the paper, and print again.

What if the text is fuzzy after printing a banner?

If the print quality seems especially poor when you switch from banner printing, you might have forgotten to reset the printer for normal printing.

53