HP 810C, 830C manual Using and Caring for Your Inkjet Print Cartridges

4 Using and Caring for Your Inkjet Print Cartridges

1 With the printer turned on, open the top cover.

In a few moments the print cartridge cradles automatically move to the center

of the printer and the Inkjet Print Cartridge light flashes.

2Snap up the cradle latch from the top of the inkjet print cartridge to be replaced.

3Lift the cartridge out of the cradle.

4Discard the empty cartridge.

5Remove the replacement inkjet print cartridge from its packaging.

6Carefully remove the protective vinyl tape from the replacement cartridge.

Note: Be careful not to touch the ink nozzles or the copper contacts. Touching these parts of the inkjet print cartridge can result in clogs, ink failure, or bad electrical connection. Also, do NOT remove the copper strip; these are electrical contacts required for proper operation of the inkjet print cartridges.

7Place the cartridge into the now-empty print cartridge cradle and push the cartridge firmly, straight down into the cradle.

8Close the latch. You will notice some resistance when closing the latch. When the latch is fully closed, you will hear a click.

9Close the top cover.

YouÕll hear the cradle mechanism move, returning to the home position on the right side of the printer.

10 If the inkjet print cartridge light continues to blink after you install new inkjet print cartridges, check the part numbers on the cartridges to ensure you installed the correct ones:

895Cxi, 895Cse, 880C, 882C, 832C, 830C, 815C require:

Black HP 51645 Series Tri-Color HP C1823 Series

810C, 812C require:

Black HP No. [15] (equivalent to C6615A) Tri-Color HP No. [23] (equivalent to C1823 Series)

Warning Keep new and used inkjet print cartridges out of the reach of children.

56