HP 820 E manual Connecting by infrared, To close the connection

Chapter 4 Connecting to your desktop PC 75

To close the connection

1.On your HP Jornada, double-click the connection icon in the status area of the task bar.

2.In the Connection Status dialog box, click Disconnect.

Connection

icon

Connecting by infrared

You can use the infrared port on your HP Jornada to connect to a desktop or notebook PC that is running WindowsÊ95 (or later). Once connected, you can transfer files and synchronize Pocket Outlook data and e-mail messages just as if you had connected using the sync cable.

Before you can connect by infrared, you must set up and configure an infrared port on your desktop or notebook PC. Many notebook PCs have a built-in infrared port; however, you may need to install a third-party infrared transceiver on your desktop PC. For more information about installing and configuring that device for use with your desktop PC, refer to the instructions that came with your infrared port .

The Desktop Software for Microsoft Windows CE compact disc also includes infrared device drivers for Windows 95.

To configure Windows CE Services for infrared connection

1.Insert the Desktop Software for Microsoft WindowsÊCE compact disc into the CD-ROM drive on your desktop PC, and then run Setup.exe.

2.Click Optional Components, and then select the Windows 95 Communications Driver setup program.

3.When the setup program prompts you to specify a communications port, select a virtual port (typically COM3).

Chapter4.p65 0109 75 2/4/99, 4:10 PM