RTC battery
Description | Spare part number |
|
|
RTC battery (includes cable and | |
|
|
Before removing the RTC battery, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 57), and then remove the following components:
a.Service cover (see Service cover on page 59)
b.Smart Card reader (see Smart Card reader on page 60)
c.Optical drive (see Optical drive on page 61)
d.Hard drive (see Hard drive on page 65)
e.Modem module (see Modem module on page 74)
f.Keyboard (see Keyboard on page 76)
g.Base enclosure (see Base enclosure on page 80)
Remove the RTC battery:
1.Disconnect the RTC battery cable (1) from the TouchPad.
94 | Chapter 4 Removal and replacement procedures |
