f.Remove the two Phillips PM2.0×3.0 screws (1) that secure the display hinge tube to the display enclosure.

g.Release the display hinge tube (2) by sliding it away from the display enclosure.

h.Release the wireless antenna cables (3), display panel cable (4), and webcam/microphone cable (5) from the display hinge tube, noting of the locations of the display cable guides (6) at the left and right ends of the display hinge tube.

i.Remove the display hinge tube. The display hinge tube, display hinge inner covers, display hinge outer covers, and display cable guides are available in the Display Hinge Cover Kit, spare part number 686024-001.

The display hinges are available using spare part number 642782-001.

10.If it is necessary to replace the display panel:

a.Remove the four Phillips PM2.0×4.0 screws (1) that secure the display panel to the display enclosure.

b.Remove the display panel (2) from the display enclosure. The display panel is available using the following spare part numbers.

●686047-001 — 14.0-in, LED, FLT, HD+, AntiGlare display panel

●686046-001 — 14.0-in, LED, FLT, HD, AntiGlare display panel

●684348-001 — 14.0-in, LED, SVA, HD+, AntiGlare display panel

●684347-001 — 14.0-in, LED, SVA, HD, AntiGlare display panel

112

Chapter 4 Removal and replacement procedures