c.Remove the WLAN antenna cables and transceivers (3). The WLAN antenna cables and transceivers are included in the Antenna Kit, spare part number
14.If it is necessary to replace the WWAN antenna cables and transceivers:
a.Release the WWAN antenna cables from the clips (1) and routing channel built into the display enclosure.
b.Detach the WWAN antenna transceivers (2) from the display enclosure. (The WWAN antenna transceivers are attached to the display enclosure with
c.Remove the WWAN antenna cables and transceivers (3). The WWAN antenna cables and transceivers are included in the Antenna Kit, spare part number
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures | 115 |