Fan
Description | Spare part number |
|
|
Fan (includes cable) | |
|
|
Before removing the fan, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 57).
5.Remove the service cover (see Service cover on page 59).
Remove the fan:
1.Disconnect the fan cable (1) from the system board.
2.Loosen the captive Phillips screw (2) that secures the fan to the top cover.
3.Remove the Phillips PM2.5×5.0 screw (3) that secures the fan to the top cover.
4.Remove the fan (4).
Reverse this procedure to install the fan.
Component replacement procedures | 75 |