3.Remove the three Phillips PM2.5×4.0 screws that secure the system board to the top cover.

4.Flex the right side of the top cover (1) until the connectors on the right side of the system board are clear.

5.Lift the right side of the system board (2) until it rests at an angle.

6.Remove the system board (3) by sliding it up and to the right at an angle.

Reverse this procedure to install the system board.

Component replacement procedures

99

Page 107
Image 107
HP 8470p C7M31UP 14.0 C7M31UP#ABA, 8470w C7A68UTABA, 14 C7A68UT#ABA manual