Restoring previous settings

Some of the settings that you can change in the camera menus do not remain set after you turn the camera off. However, you can restore the settings from the last time the camera was on and had at least one non-default setting (which could actually be several power cycles ago) by holding down the OK button while also sliding the ON/OFF switch to turn the camera on. The restored settings are then displayed across the top of the status screen. (See the previous section.)

Choosing the language

The first time you turn the camera on, the following screen appears and prompts you to choose a language.

1Scroll to the language that you

want by using the buttons on the Controller .

2Press the OK button to select the highlighted language.

Setting the date and time

The camera has a clock that records the date and time at which you take each picture. The first time you turn the camera on, the following screen appears after you choose the language.

1Adjust the value of the highlighted selection by

using the buttons.

2Press the buttons to move to the other selections.

18

hp photosmart 930 series user’s manual