To print directly to an HP Photosmart printer or to any other HP printer with a front panel USB port:

1Check that the printer is turned on and

is online. (There should be no blinking lights on the printer or error messages displayed about the printer.) Load paper into the printer, if needed.

2 Your camera came with a special USB cable for connecting the camera directly to a printer. Connect the square end of the USB cable to the printer.

3Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.

The Print Setup menu displays on the camera. If you already selected images to print from the camera Share menu, the number of images selected will be shown, as in this example Print Setup menu. Otherwise, Images: ALL will be displayed.

4Adjust the settings in the Print Setup menu by using the

buttons to highlight a menu option and the

buttons to change the setting for each option.

NOTE There is a print preview in the lower right-hand corner of the Print Setup screen showing the page layout that will be used for printing images. This print preview updates as you change the settings for the Print Size and Paper Size.

5Press the OK button to begin printing.

Chapter 5: Unloading and printing images

69