HP Photosmart 930 Resetting the camera, Reset, Reset, too dark, Exposure, My image is, (continued)

Problem	Possible cause	Solution
My image is	Your finger	Be sure to move your fingers
too dark.	blocked the	away from the flash when you
(continued)	flash.	take a picture.
	The scene had	Increase the Exposure
	many light-	Compensation (see page 32) so
	colored objects,	the light-colored objects in the
	such as a white	scene will not look “muddy.”
	dog in snow.

Resetting the camera

If your camera does not respond when you press any buttons, use the camera Reset switch to reset the camera:

1Open the battery door on the bottom of the camera and remove both batteries.

2Press the straightened end of a

paper clip into the Reset switch until the switch is depressed, then remove the paper clip. The camera is reset.

3 Reinsert the batteries and close the battery door. You may now use the camera again.

Chapter 7: Troubleshooting and support 83