When you have not changed Exposure Compensation for

2 seconds, the meter disappears, but the value remains at the bottom of the screen flanked by arrows (unless it has been set to 0).

Exposure Compensation resets to the default 0 (zero) setting when you turn the camera off.

Setting the flash

NOTE The flash does not work while recording video clips.

The Flash button lets you toggle

between the four flash settings

on the camera. Auto A is the default flash setting. The flash setting resets to Auto when you turn the camera off.

To change the flash setting,

press the Flash button on the top of the camera until the Flash Off , Flash On , or Night flash light is lit. The default

Auto A flash setting is selected when none of the three flash lights is lit. The following table describes the different flash settings.

Chapter 2: Taking pictures and recording video clips

33