Date & time

If you press OK when the Date & Time option is highlighted in the Setup menu, the Date & Time screen displays. This screen allows you to set the current date and time, as well as the date/time format, for the camera. This is usually done when

you first set up the camera; however, you may need to re-set the date and time when you are travelling to different time zones, or when the batteries are removed from the camera for more than 10 minutes.

To set the date, time, and date/time format, follow the same procedure used in Setting the date and time on page 18.

USB configuration

If you press OK when the USB option is highlighted in the Setup menu, the USB Configuration sub-menu displays. This sub-menu determines how the camera is recognized when connected to a computer.

zDigital Camera—Causes the

computer to recognize the camera as a digital camera using the Picture Transfer Protocol (PTP) standard. This is the default setting on the camera. Use this setting for unloading and sharing on a Windows computer that has the HP Photo & Imaging software installed on it.

72

hp photosmart 930 series user’s manual