HP A3311A, A3312A, A3312AZ Rackmount AC Power Adapter, Figure 41. Replacing the Rackmount AC Power Adapter, To replace the rackmount ac power adapter (Figure 41):

Service

Service

AC Power Adapter

Rackmount AC Power Adapter

To replace the rackmount ac power adapter (Figure 41):

1.Remove the power module.

2.Remove two T10 screws (item 1)

3.Remove two star washers (item 3).

4.Remove the ac power adapter (item 2).

5.Replace the ac power adapter in reverse order, ensuring the lock washers are located between the ac power adapter and the rear of the chassis.

NOTE! Put the screws and washers on the power adapter, then fasten the entire assembly at once.

Figure 41. Replacing the Rackmount AC Power Adapter

1	- M3/T10 Screw (2)	3 - Star Washer (2)
2	- AC Power Adapter

106