Manuals / Brands / Power Tools / Tool Storage / HP / Power Tools / Tool Storage

HP A3311A, A3312A, A3312AZ Installing a Fan Module, Installing a Power Module

1 149

Installation

Installation & Configuration

Installing Additional Modules

NOTE! The storage system is shipped with two fan modules. See Chapter 4 for information on replacing a fan module.

The storage system is shipped with one power module.

To install a second power module for redundancy:

1.Pull out the module lever (see Figure 6).

CAUTION! Pull the module lever all the way out, or the module will jam in the slot.

2.Install the power module into slot P2.

3.Push in the module lever until it clicks to lock the module in place.

Figure 6. Installing a Power Module