Service Door Assembly

Deskside Security Lock and LatchTo replace the deskside security lock and latch (Figure 33):

1.Using a 3/8 inch nut driver, remove the #10 nut (1a), lock washer (1b), and pawl (1c).

2.Use a 19 mm deep socket to remove the M12 nut (1d).

3.Remove the lock washer (1e).

4.Remove the latch (2) and security lock (1).

5.Install the security lock parts in reverse order, ensuring the key slot is pointing up and the pawl is positioned to allow the lock to turn outward to lock.

Figure 33. Replacing the Deskside Security Lock

Service

1 - Security Lock

1d - M12 Nut

1a - #10 Nut

1e - M12 Lock Washer

1b - #10 Lock Washer

2 - Door Latch

1c - Pawl

 

Deskside Switch CoverTo replace the deskside switch cover:

1.Press the switch cover outward from behind the door.

2.Snap the switch cover in place from the front of the door.

93