Troubleshooting & Diagnostics Diagnostic Information

Table 21. DDS Tape Module Additional Sense Codes

Code Description

00 00h No additional sense information

00 01h Filemark detected

00 02h EOP/M detected

00 03h Setmark detected

00 04h BOP/M detected

00 05h EOD detected

04 00h LUN not ready, cause not reportable

04 01h LUN becoming ready

04 02h LUN not ready, initializing command required

09 00h Track following error

0C 00h Write error

11 00h Unrecovered read error

14 03h EOD not found

15 01h Mechanical positioning error

17 00h Recovered data with no error correction applied

17 01h Recovered data with retries

18 00h Recovered data with error correction applied

1A 00h Parameter list length error

20 00h Invalid command operation code

24 00h Invalid field in command descriptor block

25 00h LUN not supported

26 00h Invalid field in parameter list

27 00h Write-protected

28 00h Not ready-to-ready transition

29 00h Power-on, reset, or bus device reset occurred 2A 01h Mode parameters changed

30 00h Incompatible medium

30 01h Cannot read media, unknown format

30 02h Cannot read media, incompatible format

30 03h Cleaning cartridge installed

31 00h Medium format corrupted

33 00h Tape length error

37 00h Parameter rounded

3A 00h Medium not present

83

Troubleshooting