Connect to an integrated wireless Wlan 802.11 network | HP C4385

Chapter 2

To set up the HP All-in-One on an integrated wireless WLAN 802.11 network, you need to do the following:

First, collect all of the required materials.

Next, install the software and connect the HP All-in-One to the wireless router.

See this section:

“What you need for an integrated wireless WLAN 802.11 network” on page 6

“Connect to an integrated wireless WLAN

802.11network” on page 6

Network setup

What you need for an integrated wireless WLAN 802.11 network

To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:

❑A wireless 802.11 network that includes a wireless router or access point.

❑A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on.

❑If you connect the HP All-in-One on a wireless network that has Internet access, HP recommends that you use a wireless router (access point or base station) that uses Dynamic Host Configuration Protocol (DHCP).

❑Network name (SSID).

❑WEP key or WPA Passphrase (if needed).

Connect to an integrated wireless WLAN 802.11 network

The HP Photosmart Software CD and included USB setup cable provide an easy way to connect the HP All-in-One to your wireless network.

6 Network setup

Image 8

HP C4385, C4380, C4390 manual What you need for an integrated wireless Wlan 802.11 network

Contents

HP Photosmart C4380 All-in-One series Hewlett-Packard Company notices Contents HP All-in-One overview HP All-in-One at a glance Control panel buttons HP All-in-One overview Onscreen Help Setup GuideFind more information Network setup Integrated wireless Wlan 802.11 network setup What you need for an integrated wireless Wlan 802.11 network Connect to an integrated wireless Wlan 802.11 network Wireless ad hoc network setup To connect the HP All-in-One What you need for an ad hoc network Create a network profile for a Windows XP computer Create a network profile for other operating systems Connect to a wireless ad hoc networkCommunication mode Ad Hoc Encryption enabled Connect to additional computers on a network Manage your network settings Change basic network settings from the control panelPrint network settings Restore network defaults Print the wireless network test Wireless Network Test prints Use the HP All-in-One features Load originals and load paperTo load an original on the scanner glass To load full-size paper Use HP All -in One features Avoid paper jams To load 10 x 15 cm 4 x 6 inch photo paper in the input tray Print 10 x 15 cm 4 x 6 inch photos To print one or more 10 x 15 cm 4 x 6 inch photos To scan to a computer Scan an image or documentMake a copy Replace the print cartridges To make a copy from the control panelPress Start Copy Black or Start Copy Color to begin copying To replace the print cartridges Replace the print cartridges Clean the HP All-in-One Clean the glass To clean the lid backing Clean the lid backingTo clean the glass Troubleshooting and support Uninstall and reinstall the softwareHardware setup troubleshooting HP All-in-One will not turn on Solution HP All-in-One does not print Wireless setup troubleshooting Weak signal Cannot connect to network during setup Invalid WEP key during wireless setupInvalid passphrase during wireless setup Printer Not Found screen appears during installation To clear a paper jam from the front door Clear paper jamsTo clear a paper jam from the rear door Print cartridge troubleshooting If you have a problem, follow these steps Support process Product specifications Technical informationSystem requirements Print cartridge yield Regulatory notices Regulatory model identification number Warranty $UJHQWLQD