HP Cooktop 10GBE Introduction, Enterprise class performance, Configuration and management, Diagnostic tools, Features, Pass-thrumodule architecture

Introduction

Features

The 10GbE Pass-Thru Module is designed for easy installation and high performance in an environment where network traffic and users increase continually.

Enterprise class performance

The 10GbE Pass-Thru Module includes the following features:

•The unique ability to provide both 1 Gigabit and 10 Gigabit functionality on each port, enabling greater network flexibility

•Full support on the HP c-Class BladeSystem server blade enclosure and infrastructure compatible with any combination of HP c-Class BladeSystem server blades

•The ability to replace an existing 10GbE Pass-Thru Module without powering down the server blades or the enclosure

•Preconfiguration for immediate use with the HP c-Class BladeSystem Enclosure

•Robust configuration and management from the 10GbE Pass-Thru Module internal or external CLI

•Support for 10GbE Pass-Thru Module firmware upgrade using XModem functionality

Configuration and management

The 10GbE Pass-Thru Module has the ability to enable or disable auto-negotiation on any port.

Diagnostic tools

The 10GbE Pass-Thru Module includes the following hardware and firmware diagnostic tools:

•POST built into the pass-thru module boot process

•Pass-thru module LED panel displaying per port status and speed

•Health and UID status LEDs

•Reset switch and mini-USB to DB-9 RS232 management serial port (mini-USB to DB-9 RS232 cable sold separately)

•The ability to return the pass-thru module to known good condition in case of firmware corruption

Pass-thru module architecture

The pass-thru module provides a 10GBASE-KR-to-SFI interface conversion, connecting through the enclosure backplane to 10GBASE-KR lanes from 16 server blades and brings out Small Form Factor Interface signals terminating in SFP/SFP+ transceiver connectors on the faceplate of the module.

Introduction 5