Removal and Replacement Procedures
4.Turn the top cover upside down with the front panel toward you.
✎Steps 5 and 6 apply only to HP Pavilion dv1000 models. See steps 7 and 8 in this section for information on removing the system board on HP Compaq nx4800 and Compaq Presario V2000 models.
5.Release the ZIF connector 1 to which the LED board cable is connected and disconnect the cable 2 from the system board.
6.Remove the four PM2.0×4.0 screws 3 that secure the system board to the top cover.
Disconnecting the LED Board Cable and Removing the System Board Screws, HP Pavilion dv1000 models Only
Maintenance and Service Guide |