Removal and Replacement Procedures

Steps 8 and 9 apply only to HP Compaq nx4800 and Compaq Presario V2000 models.

8.Remove the following:

1 Fifteen PM2.0×7.0 screws

2 Three PM2.0×4.0 screws

9.Lift the base enclosure 3 straight up and remove it.

Removing the Base Enclosure, HP Compaq nx4800 and

Compaq Presario V2000 models Only

Reverse the above procedure to install the base enclosure.

Maintenance and Service Guide

5–39

Page 150
Image 150
HP DV1270 manual Reverse the above procedure to install the base enclosure