Removal and Replacement Procedures— Microtower (µT) Chassis

6.4Front Drive Bezels

1.Prepare the computer for disassembly (Section 6.1, “Preparation for Disassembly”).

2.Remove the access panel (Section 6.3, “Front Bezel”).

3.Remove the front bezel (Section 6.3, “Front Bezel”).

6.4.1 5.25" Drive Bezel Blank

Press one of the retaining tabs on the inside of the large bezel towards the outer edge of the bezel to release the bezel blank. At the same time, pull the bezel blank inwards to remove it from the main bezel.

To install a bezel blank, reverse the removal procedure.

 

6–4

359782-002

Service Reference Guide, dx2000 uT