Chapter 12

Troubleshooting

If the connections are secure, and nothing has printed several minutes after you sent

aprint job to the HP All-in-One, check the status of the HP All-in-One. In the HP Photosmart Software, click Status.

For more information, see:

Communication problems over a USB connection

Cause: The HP All-in-One has a paper jam.

Solution: Clear the paper jam.

For more information, see:

Clear paper jams

Cause: The print carriage has stalled.

Solution: Turn the HP All-in-One off, remove any objects that are blocking the print carriage (including any packing materials), and then turn the HP All-in-One on again.

Cause: The HP All-in-One is out of paper.

Solution: Load paper in the input tray.

For more information, see:

Load full-size paper

The pages in my document came out in the wrong order

Cause: The print settings are set to print the first page of your document first. Because of the way the paper feeds through the HP All-in-One, this means the first page will be print side up at the bottom of the stack.

Solution: Print the document in reverse order. When the document finishes printing, the pages will be in correct order.

For more information, see:

Print a multiple-page document in reverse order

The margins are not printing as expected

Cause: The margins are not set correctly in your software application.

104 Troubleshooting