Chapter 6
HP Inkjet labels (for printing only)1.Always use letter or A4 label sheets designed for use with HP inkjet devices (such as HP inkjet labels), and make sure that the labels are no more than two years old. Labels on older sheets might peel off when the paper is pulled through the HP
2.Fan the stack of labels to make sure none of the pages are sticking together.
3.Place a stack of label sheets on top of
For best results, set the paper type before copying or printing.
HP CD/DVD Tattoo labels (for printing only)▲Place one sheet of CD/DVD tattoo paper in the input tray with the print side down; slide the CD/DVD tattoo paper forward until it stops.
NOTE: When you use CD/DVD tatoo labels, leave the tray extender closed.
Related topics
•Load 10 x 15 cm (4 x 6 inch) photo paper
paper load and originals Load
Avoid paper jams
To help avoid paper jams, follow these guidelines.
•Remove printed papers from the output tray frequently.
•Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag.
•Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.
•Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the input tray must be the same size and type.
•Adjust the
•Do not force paper too far forward in the input tray.
•Use paper types that are recommended for the HP
Related topics
28 Load originals and load paper