3.Make sure the test patterns show a complete grid and the thick color lines are complete.

If more than a few lines in a pattern are broken, this might indicate a problem with the nozzles. You might need to clean the print cartridges.

If the black line is missing, faded, streaked, or shows lines, this might indicate a problem with the black or photo print cartridge in the right slot.

If any of the color lines are missing, faded, streaked, or show lines, this might indicate a problem with the tri-color print cartridge in the left slot.

Related topics

Clean the print cartridges

Replace the print cartridges

Control panel buttons

Work with print cartridges

To ensure the best print quality from the HP All-in-One, you will need to perform some simple maintenance procedures. This section provides guidelines for handling the print cartridges and instructions for replacing, aligning, and cleaning the print cartridges.

You might also need to check your print cartridges if the Check Print Cartridge light is on. This might mean that the print cartridges are not installed properly or are missing, the plastic tape has not been removed from the print cartridges, the print cartridges are out of ink, or the print carriage is blocked.

This section contains the following topics:

Handle the print cartridges

Check the estimated ink levels

Replace the print cartridges

Use ink-backup mode

Use a photo print cartridge

Store the print cartridges

Align the print cartridges

Clean the print cartridges

Clean the print cartridge contacts

Clean the area around the ink nozzles

Remove ink from your skin and clothing

Maintain the HP All-in-One

Work with print cartridges

61