Chapter 12

Troubleshooting

(continued)

On light

Resume

Check

Paper

Description

Solution

 

light

Print

Type

 

 

 

 

 

Cartridge

lights

 

 

 

 

 

light

 

 

 

 

 

 

 

 

The print cartridge

1.

Remove the

 

 

 

 

might be defective.

 

black print

 

 

 

 

 

 

cartridge.

 

 

 

 

 

2.

Close the print

 

 

 

 

 

 

cartridge door.

 

 

 

 

 

3.

Check the On

 

 

 

 

 

 

light.

 

 

 

 

 

 

If the On light

 

 

 

 

 

 

blinks,

 

 

 

 

 

 

replace the

 

 

 

 

 

 

tri-color print

 

 

 

 

 

 

cartridge.

 

 

 

 

 

 

If the On light

 

 

 

 

 

 

remains

 

 

 

 

 

 

steadily lit,

 

 

 

 

 

 

replace the

 

 

 

 

 

 

black print

 

 

 

 

 

 

cartridge.

 

 

 

 

 

 

On

Blinking

Blinking

1 On,

The print carriage is

Open the print

 

 

 

1 Off

stalled.

cartridge door, and

 

 

 

 

check that the

 

 

 

 

 

 

 

 

 

 

carriage is not

 

 

 

 

 

blocked.

 

 

 

 

 

 

On

Blinking

Blinking

Both

The control panel

1. Turn the HP All-

 

 

 

blinking

overlay is not

 

in-One off.

 

 

 

 

attached or is not

2.

Attach the control

 

 

 

 

attached properly.

 

panel overlay

 

 

 

 

 

 

using the

 

 

 

 

 

 

instructions in the

 

 

 

 

 

 

Setup Guide.

 

 

 

 

 

3. Turn the HP All-

 

 

 

 

 

 

in-One back on.

 

 

 

 

 

 

Blinking

Blinking

Blinking

Both off

Scanner failure

Turn the HP All-in-

 

 

 

 

 

One off, then on

 

 

 

 

 

again.

 

 

 

 

 

If the problem

 

 

 

 

 

persists, contact HP

 

 

 

 

 

customer support.

 

 

 

 

 

 

Blinking

Blinking

Blinking

Both

The HP All-in-One

1. Turn the HP All-

 

 

 

blinking

has a fatal error.

 

in-One off.

 

 

 

 

 

2.

Unplug the power

 

 

 

 

 

 

cord.

 

 

 

 

 

3.

Wait a minute,

 

 

 

 

 

 

then plug the

 

 

 

 

 

 

power cord back

 

 

 

 

 

 

in.

 

 

 

 

 

4. Turn the HP All-

 

 

 

 

 

 

in-One back on.

116 Troubleshooting