Managing HyperFabric
Displaying Status and Statistics
============================================================================
The generated output if the nodes are connected through a switch could look like this:
============================================================================
Date: Sat Aug 5 16:08:12 2000
Node: bently6.corp4.com
============================================================================
Adapter : clic0
VRID IP Address Switch Hopcount Route Id Physical route
1 | 192.0.0.1 | 1 | 0 | 0x09 |
2 | 192.0.0.2 | 1 | 0 | 0x03 |
12 | 192.0.0.12 | 1 | 0 | 0x06 |
13 | 192.0.0.13 | 1 | 0 | 0x00 |
============================================================================
Adapter : clic2
VRID IP Address Switch Hopcount Route Id Physical route
1 | 192.0.0.1 | 1 | 0 | 0x03 |
2 | 192.0.0.2 | 1 | 0 | 0x3d |
12 | 192.0.0.12 | 1 | 0 | 0x00 |
13 | 192.0.0.13 | 1 | 0 | 0x3a |
============================================================================
•Example 5
If the local node is bently7, and you want to disable all statistics gathering on bently7, issue this command:
clic_stat -p RST
Chapter 5 | 107 |
