Configuring HyperFabric

Performing the Configuration

Step 9. Exit SMH.

Once SMH has finished, you do one of the following things:

If you want to configure HyperFabric with MC/ServiceGuard, complete the configuration described in “Configuring HyperFabric with ServiceGuard” on page 76, then run clic_start or use SMH to start HyperFabric.

If you have just created the global configuration file on the local node for the first time (and you are not configuring ServiceGuard), run clic_start or use SMH to start HyperFabric.

If you have just changed an existing configuration file on the node, run clic_shutdown or use SMH to stop HyperFabric, and then run clic_start or use SMH to start HyperFabric. Until you do those two things, your configuration changes will not take effect.

See “Stopping HyperFabric” on page 110 and “Starting HyperFabric” on page 95 for more information.

Chapter 4

73

Page 73
Image 73
HP HyperFabric manual Performing the Configuration