HP HyperFabric manual

Managing HyperFabric

Stopping HyperFabric

		Using SMH
		To use SMH to stop HyperFabric on a local HP 9000 system running HP-UX 11i v3,
		follow these steps:
Step	1.	Start SMH.
Step	2.	Select the “Networking and Communications” area.
Step	3.	Select the “Network Interfaces” area.
Step	4.	Select “HyperFabric.”
Step	5.	Pull down the “Actions” menu and select Stop HyperFabric. Note that if HyperFabric is
		not running on the system, Stop HyperFabric is grayed out and you cannot select it.
		When HyperFabric stops, a confirmation message displays. Also, the status
		“HyperFabric: Not running” is displayed above the adapter configuration area of the
		screen.
Step	6.	Exit SMH.

Chapter 5 111