HP manual An ServiceGuard Configuration with Two HyperFabric Switches

Configuring HyperFabric

Configuring HyperFabric with ServiceGuard

NOTE	Because the HyperFabric network does not currently support ServiceGuard heartbeat
	connections, you must use an alternative type of connection for the heartbeat, such as
	FDDI, Token Ring, 100BaseT, or Ethernet (as shown in Figure 4-2 below).

Figure 4-2 An ServiceGuard Configuration (with Two HyperFabric Switches)

Ethernet Heartbeat LAN 1

node A

Ethernet Heartbeat LAN 0

node B

HF adapter 1

HF adapter 0

HF adapter 0

HF adapter 1

Ethernet Port	HF
	switch 0

node C

HF adapter 0

HF	Ethernet Port
switch 1

node D

HF adapter 1

HF adapter 1

HF adapter 0

Chapter 4 77