Installing HyperFabric
Installing the Software
The global configuration file, which contains the IP addresses for each adapter and each HyperFabric switch (if any) in the fabric.
•/sbin/init.d/clic
The system boot startup script for the HyperFabric management process.
•/var/adm/clic_ip_drv.trc
One of the software’s trace files. This file is created when the clic_diag
•/var/adm/clic_ip_drv.trc0
One of the HyperFabric software’s trace files. This is the primary file that is created when the clic_diag
•/var/adm/clic_ip_drv.trc1
One of the HyperFabric software’s trace files. This file is created when the clic_diag
•/var/adm/clic_log
The global log file that is updated by the HyperFabric management process.
•/var/adm/clic_log.old
The backup copy of the log file that is created when the log file grows larger than 100 Kbytes.
•/var/adm/OLDclic_log
The log file from the previous time the clic_start command was executed.
•/usr/conf/lib/libclic_dlpi_drv.a
The kernel library that contains the HyperFabric software.
•/usr/conf/lib/libha_drv.a
The kernel library that contains the High Availability (HA) software.
•/usr/conf/master.d/clic
This file is described along with the other master files in the master man page (type man master at the
•/opt/clic/lib/libclic_mgmt.a
The HyperFabric management API library.
•/opt/clic/bin
The directory containing the HyperFabric management commands: clic_diag, clic_init, clic_probe, clic_shutdown, clic_start, clic_stat, and clic_dump. (Note that clic_dump is for HP internal use only.) Also, clic_ping is replaced by clic_probe. This directory also contains the HyperFabric management process (clic_mgmtd) and the HyperFabric EMS monitor process (clic_mond).
•/opt/clic/firmware/clic_fw_4x8c
The 4X PCI HyperFabric
•/opt/clic/firmware/clic_fw_4x32c
48 | Chapter 3 |
