You may vary the nature of the information in this part of the display using the display mode button. (See Front Panel.)
4INFRARED RECEIVER AND TRANSMITTER
This part of the display accepts commands from the Nº31.5’s Remote Con- trol. (See Remote Control.) When using the Nº31.5 to teach a learning re- mote special commands, it can also transmit IR signals. (See Using Learning Remote Controls.) Always keep this window clean and unobstructed.
Display messages The display also shows a variety of messages about the Nº31.5’s status and opera- tion. Here are some of the messages you’ll see, and what they mean.
■CLOSING: The Lid is in motion (closing); appears after the Lid Open/Close button is pressed.
■FIRST TRACK: The previous button was pressed while the first track on the CD (or in a program or a random sequence) was playing.
■INDEX SEARCH: The Nº31.5 is scanning the CD for indices; appears after index mode is pressed.
■INSERT DISC: The Lid is open; appears after the Lid has stopped opening.
■LAST TRACK: The next button was pressed while the last track on the CD (or in a program) was playing.
■NEW PROGRAM: A new program was recorded in the Nº31.5’s memory; appears after program save is pressed.
■NO DAMPER: The Lid is closed and the Disc Damper isn’t installed on the spindle; appears after the Lid has closed.
■NO PROGRAM: There’s no program in the Nº31.5’s memory; ap- pears after program review or program clear is pressed.
■OPENING: The Lid is in motion (opening); appears after the Lid Open/Close button is pressed.
■P01 IS 1st: Indicates a track’s place in a program; appears after program review is pressed.
■P02 02 IS 2: Indicates an index’s place in a program; appears after program review is pressed.
■PROG CHANGED: Changes to a program were recorded in the Nº31.5’s memory; appears after program save is pressed.
■POLARITY PRG: A program including only the polarity invert func- tion was saved; appears after program save is pressed.
■PROG DELETED: A previously saved program was erased from the Nº31.5’s memory; appears after program clear is pressed, followed by pressing program save.
■PROG CLEARED: The temporary program was erased, or the previ- ously saved program was temporarily overridden; appears after program clear is pressed.
■PROGRAM END: There are no more selections in the program be- ing reviewed; appears after program review is pressed.
■READING: The Nº31.5 is reading track and time information from the CD; appears after the Lid has closed.
27